Shifter Adapter for Logitech G25, G27, G29, G920

Turn your G25, G27, G29, G920 or G923 Driving Force Shifter into a standalone USB device.

All shifter buttons function as expected.

Gear position sensors can be calibrated in our easy to use software.

Completele solution with electronics inside the cable itself
Use shifter on its own or with another wheel.
Connects directly to PC USB port with an integrated cable.
Does not need connection to a wheel. Direct USB connection only
Cable Length is 1m
Automatic recognition of connected shifter type.

Natively supported by Windows 11/10/8/7, Vista 32/64, XP, MacOS and Linux - NOT SUITABLE FOR PLAYSTATION OR XBOX
True Plug-and-play.

Switching thresholds can be adjusted with our software and permanently stored inside the device.
Especially useful for shifters with old worn gaitors.

Also available from our distributors:

	Calibration Instructions

Shifter Interface USB adapter for Logitech® G25, G27 and G29

Calibration instructions

1. Plug the pedals into the cable.

2. Plug the cable into a free USB port on your computer.

3. Wait for Microsoft Windows to automatically install the drivers for the adapter. There are no additional drivers that need to be installed. The adapter will show up in Devices and Printers.

4. Run the calibration software for the adapter.

The calibration software can be downloaded from our web site, under the product downloads tab,or from the following link.

Download Calibration Software

5. The calibration software will be empty when it first starts. Test all the gears and see if the display on the right is correct for your shifter position. If the gear display is not showing the correct gear. Then you can adjust the thresholds at which the gears are sensed. For the vertical thresholds, use the number boxes on the right hand side, for the horizontal thresholds use the number boxes at the top. When you have adjusted your thresholds, press "Update Settings". Repeat this process until all your gears are shown correctly.

6. Once the process is completed click the Update settings button. The process is complete.

Shifter Calibration Software

Latest Firmware - Click Here to Download